{"title":"3D Printer Spare Parts","description":"\u003cp\u003eKeep your 3D printer running with genuine replacement parts, stocked in Kuwait by NOZL Store. Every part is made by the printer's own manufacturer, so it fits and performs like the original.\u003c\/p\u003e\u003ch2\u003eShop by printer\u003c\/h2\u003e\u003cp\u003e\u003ca href=\"\/collections\/qidi-q2-spare-parts\"\u003eQIDI Q2 Spare Parts\u003c\/a\u003e · \u003ca href=\"\/collections\/qidi-max4-spare-parts\"\u003eQIDI Max4 Spare Parts\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eWhat you'll find\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzles:\u003c\/strong\u003e tungsten carbide for abrasive filaments like carbon fiber and glass fiber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHot ends:\u003c\/strong\u003e bimetal replacements to fix heat creep and clogs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtruders:\u003c\/strong\u003e for consistent, reliable filament feeding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI build plates:\u003c\/strong\u003e dual-sided spring steel for strong adhesion and easy release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFans, sensors and cables:\u003c\/strong\u003e the small parts that keep a print going\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"qidi-q2-tungsten-carbide-bimetal-nozzle","title":"QIDI Q2 Tungsten Carbide Bimetal Nozzle","description":"\u003cp\u003eThe QIDI Q2 Tungsten Carbide Bimetal Nozzle is a genuine replacement nozzle for the \u003ca href=\"\/products\/qidi-q2-3d-printer\"\u003eQIDI Q2\u003c\/a\u003e 3D printer. Its tungsten carbide tip resists wear far longer than brass or hardened steel, so it is the right nozzle for abrasive filaments such as carbon-fiber and glass-fiber blends. The nozzle and throat are a single piece, so a swap takes minutes with no re-assembly.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFilament diameter: 1.75 mm\u003c\/li\u003e\n\u003cli\u003eTip material: tungsten carbide, in a bimetal body\u003c\/li\u003e\n\u003cli\u003eDesign: integrated nozzle and throat, quick-release\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 nozzle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eFits the QIDI Q2, Q2C and Plus5. It does not fit the QIDI Max4 or Plus4, which use a nozzle of a different length.\u003c\/p\u003e\n\u003ch2\u003eWhen to replace it\u003c\/h2\u003e\n\u003cp\u003eReplace the nozzle when you see under-extrusion, a worn or widened tip, or clogs that cleaning does not clear. If you print abrasive filaments regularly, keep a spare on hand.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eCan I print carbon-fiber filament with this nozzle?\u003c\/h3\u003e\n\u003cp\u003eYes. Tungsten carbide is built for abrasive materials like carbon-fiber and glass-fiber filled PLA, PETG, PA and PC.\u003c\/p\u003e\n\u003ch3\u003eIs it in stock in Kuwait?\u003c\/h3\u003e\n\u003cp\u003eYes. NOZL Store keeps genuine QIDI spare parts in stock in Kuwait, ready for local delivery.\u003c\/p\u003e\n\u003ch3\u003eAny tips for a longer nozzle life?\u003c\/h3\u003e\n\u003cp\u003eStick to one filament type per nozzle where you can, as large temperature swings between materials raise the risk of clogs. Recommended print settings are in the \u003ca href=\"\/pages\/filament-guide\"\u003eNOZL Filament Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eGenuine QIDI part, stocked in Kuwait by NOZL Store with local delivery. Looking for the printer itself? See the \u003ca href=\"\/products\/qidi-q2-3d-printer\"\u003eQIDI Q2\u003c\/a\u003e.\u003c\/p\u003e","brand":"QIDI","offers":[{"title":"0.4mm","offer_id":50212441325723,"sku":"NOZL_SPR_QIDI_Q2_NZZL_TC04","price":21.5,"currency_code":"KWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/9870\/2235\/files\/qidi-q2-tungsten-carbide-bimetal-nozzle-nozl.webp?v=1794592685"},{"product_id":"qidi-q2-dual-sided-pei-build-plate","title":"QIDI Q2 Dual-Sided PEI Build Plate","description":"\u003cp\u003eThe QIDI Q2 Dual-Sided PEI Build Plate is a genuine replacement print surface for the \u003ca href=\"\/products\/qidi-q2-3d-printer\"\u003eQIDI Q2\u003c\/a\u003e. PEI on both sides of a flexible spring-steel sheet gives strong first-layer adhesion while hot, and clean release once it cools. Flex the plate and prints pop off, with no scraper needed.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSurface: PEI on both sides\u003c\/li\u003e\n\u003cli\u003eBase: magnetic, flexible spring steel\u003c\/li\u003e\n\u003cli\u003eSized for the QIDI Q2 heated bed\u003c\/li\u003e\n\u003cli\u003eWorks with PLA, PETG, ABS, ASA, TPU and most engineering filaments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eMade for the QIDI Q2.\u003c\/p\u003e\u003ch2\u003eWhen to replace it\u003c\/h2\u003e\u003cp\u003eReplace the plate when first layers stop sticking even after a proper clean, or when the surface is scratched, dented or worn through. Many makers keep a second plate so one can be cleaned while the other prints.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eHow do I clean a PEI plate?\u003c\/h3\u003e\u003cp\u003eWash it with warm water and dish soap, rinse and dry it. Avoid touching the print surface with bare fingers, as skin oils reduce adhesion.\u003c\/p\u003e\u003ch3\u003eIs it in stock in Kuwait?\u003c\/h3\u003e\u003cp\u003eYes. NOZL Store keeps genuine QIDI spare parts in stock in Kuwait, ready for local delivery.\u003c\/p\u003e\u003cp\u003eGenuine QIDI part, stocked in Kuwait by NOZL Store with local delivery. Looking for the printer itself? See the \u003ca href=\"\/products\/qidi-q2-3d-printer\"\u003eQIDI Q2\u003c\/a\u003e.\u003c\/p\u003e","brand":"QIDI","offers":[{"title":"Default Title","offer_id":50206747459739,"sku":"NOZL_SPR_QIDI_Q2_PEI","price":11.5,"currency_code":"KWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/9870\/2235\/files\/qidi-q2-dual-sided-pei-build-plate-nozl.webp?v=1794592685"},{"product_id":"qidi-q2-bimetal-hot-end","title":"QIDI Q2 Bimetal Hot End","description":"\u003cp\u003eThe QIDI Q2 Bimetal Hot End is a genuine replacement hot end for the \u003ca href=\"\/products\/qidi-q2-3d-printer\"\u003eQIDI Q2\u003c\/a\u003e 3D printer. A bimetal hot end keeps heat where it belongs, in the melt zone, which reduces heat creep and clogs. Fit it to replace a worn or damaged hot end, or keep one on the shelf so a failure does not stop your work.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eType: bimetal hot end\u003c\/li\u003e\n\u003cli\u003eGenuine QIDI part\u003c\/li\u003e\n\u003cli\u003eMade for the QIDI Q2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eMade for the QIDI Q2.\u003c\/p\u003e\u003ch2\u003eWhen to replace it\u003c\/h2\u003e\u003cp\u003eReplace the hot end if it has been damaged in a crash, if heat creep or clogs keep returning after a nozzle change, or if the heater or thermistor area is damaged.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eDo I need a new hot end or just a new nozzle?\u003c\/h3\u003e\u003cp\u003eStart with the nozzle. If problems continue after a nozzle swap, the hot end is the next part to replace.\u003c\/p\u003e\u003ch3\u003eIs it in stock in Kuwait?\u003c\/h3\u003e\u003cp\u003eYes. NOZL Store keeps genuine QIDI spare parts in stock in Kuwait, ready for local delivery.\u003c\/p\u003e\u003cp\u003eGenuine QIDI part, stocked in Kuwait by NOZL Store with local delivery. Looking for the printer itself? See the \u003ca href=\"\/products\/qidi-q2-3d-printer\"\u003eQIDI Q2\u003c\/a\u003e.\u003c\/p\u003e","brand":"QIDI","offers":[{"title":"Default Title","offer_id":50206749065371,"sku":"NOZL_SPR_QIDI_Q2_HTND","price":13.0,"currency_code":"KWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/9870\/2235\/files\/qidi-q2-bimetal-hot-end-nozl.webp?v=1794592685"},{"product_id":"qidi-q2-extruder","title":"QIDI Q2 Extruder","description":"\u003cp\u003eThe QIDI Q2 Extruder is a genuine replacement extruder for the \u003ca href=\"\/products\/qidi-q2-3d-printer\"\u003eQIDI Q2\u003c\/a\u003e. Its hardened steel dual gears grip the filament from both sides for strong, consistent feeding, and they hold up to abrasive filaments that wear softer gears quickly.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDrive: dual gears\u003c\/li\u003e\n\u003cli\u003eGear material: hardened steel\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 1.75 mm\u003c\/li\u003e\n\u003cli\u003eGenuine QIDI part\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eMade for the QIDI Q2.\u003c\/p\u003e\u003ch2\u003eWhen to replace it\u003c\/h2\u003e\u003cp\u003eReplace the extruder if you see clicking, grinding, inconsistent extrusion or under-extrusion that a nozzle change does not fix, or if the gears are visibly worn.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eCan it handle carbon-fiber filament?\u003c\/h3\u003e\u003cp\u003eYes. The hardened steel gears are made to handle abrasive filaments. Pair it with a tungsten carbide nozzle for the best results.\u003c\/p\u003e\u003ch3\u003eIs it in stock in Kuwait?\u003c\/h3\u003e\u003cp\u003eYes. NOZL Store keeps genuine QIDI spare parts in stock in Kuwait, ready for local delivery.\u003c\/p\u003e\u003cp\u003eGenuine QIDI part, stocked in Kuwait by NOZL Store with local delivery. Looking for the printer itself? See the \u003ca href=\"\/products\/qidi-q2-3d-printer\"\u003eQIDI Q2\u003c\/a\u003e.\u003c\/p\u003e","brand":"QIDI","offers":[{"title":"Default Title","offer_id":50206749819035,"sku":"NOZL_SPR_QIDI_Q2_EXTR","price":11.0,"currency_code":"KWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/9870\/2235\/files\/qidi-q2-extruder-nozl.webp?v=1794592685"},{"product_id":"qidi-q2-filament-runout-sensor","title":"QIDI Q2 Filament Runout Sensor","description":"\u003cp\u003eThe QIDI Q2 Filament Runout Sensor is a genuine replacement sensor for the \u003ca href=\"\/products\/qidi-q2-3d-printer\"\u003eQIDI Q2\u003c\/a\u003e. It detects when the filament runs out and pauses the print, so you can load a new spool and continue instead of losing a long job.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFunction: filament runout detection with automatic pause\u003c\/li\u003e\n\u003cli\u003eGenuine QIDI part\u003c\/li\u003e\n\u003cli\u003eMade for the QIDI Q2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eMade for the QIDI Q2.\u003c\/p\u003e\u003ch2\u003eWhen to replace it\u003c\/h2\u003e\u003cp\u003eReplace the sensor if the printer reports a runout while filament is loaded, or keeps printing after the spool has run out.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWhy does my printer say the filament has run out when it hasn't?\u003c\/h3\u003e\u003cp\u003eA faulty or dirty runout sensor is a common cause. Check the filament path first, then replace the sensor if the error continues.\u003c\/p\u003e\u003ch3\u003eIs it in stock in Kuwait?\u003c\/h3\u003e\u003cp\u003eYes. NOZL Store keeps genuine QIDI spare parts in stock in Kuwait, ready for local delivery.\u003c\/p\u003e\u003cp\u003eGenuine QIDI part, stocked in Kuwait by NOZL Store with local delivery. Looking for the printer itself? See the \u003ca href=\"\/products\/qidi-q2-3d-printer\"\u003eQIDI Q2\u003c\/a\u003e.\u003c\/p\u003e","brand":"QIDI","offers":[{"title":"Default Title","offer_id":50206749851803,"sku":"NOZL_SPR_QIDI_Q2_RUNOUT","price":4.0,"currency_code":"KWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/9870\/2235\/files\/qidi-q2-filament-runout-sensor-nozl.webp?v=1794592685"},{"product_id":"qidi-q2-model-cooling-fan","title":"QIDI Q2 Model Cooling Fan","description":"\u003cp\u003eThe QIDI Q2 Model Cooling Fan is a genuine replacement part-cooling fan for the \u003ca href=\"\/products\/qidi-q2-3d-printer\"\u003eQIDI Q2\u003c\/a\u003e. It cools each layer as it is printed, which keeps overhangs, bridges and fine details sharp, especially with PLA.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFunction: part (model) cooling\u003c\/li\u003e\n\u003cli\u003eGenuine QIDI part\u003c\/li\u003e\n\u003cli\u003eMade for the QIDI Q2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eMade for the QIDI Q2.\u003c\/p\u003e\n\u003ch2\u003eWhen to replace it\u003c\/h2\u003e\n\u003cp\u003eReplace the fan if it is noisy, spinning slowly or not at all, or if overhangs and bridges have suddenly got worse.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs this the same as the hot end cooling fan?\u003c\/h3\u003e\n\u003cp\u003eNo. The model cooling fan cools the printed part. The hot end fan cools the hot end to prevent clogs.\u003c\/p\u003e\n\u003ch3\u003eIs it in stock in Kuwait?\u003c\/h3\u003e\n\u003cp\u003eYes. NOZL Store keeps genuine QIDI spare parts in stock in Kuwait, ready for local delivery.\u003c\/p\u003e\n\u003cp\u003eGenuine QIDI part, stocked in Kuwait by NOZL Store with local delivery. Looking for the printer itself? See the \u003ca href=\"\/products\/qidi-q2-3d-printer\"\u003eQIDI Q2\u003c\/a\u003e.\u003c\/p\u003e","brand":"QIDI","offers":[{"title":"Default Title","offer_id":50206750081179,"sku":"NOZL_SPR_QIDI_Q2_FAN_MDL","price":6.5,"currency_code":"KWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/9870\/2235\/files\/qidi-q2-model-cooling-fan-nozl.webp?v=1794592685"},{"product_id":"qidi-max4-tungsten-carbide-bimetal-nozzle","title":"QIDI Max4 Tungsten Carbide Bimetal Nozzle","description":"\u003cp\u003eThe QIDI Max4 Tungsten Carbide Bimetal Nozzle is a genuine replacement nozzle for the \u003ca href=\"\/products\/qidi-max4\"\u003eQIDI Max4\u003c\/a\u003e 3D printer. Its tungsten carbide tip resists wear far longer than brass or hardened steel, making it the right choice for abrasive filaments such as carbon-fiber and glass-fiber blends. The nozzle and throat are a single piece for fast replacement.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFilament diameter: 1.75 mm\u003c\/li\u003e\n\u003cli\u003eTip material: tungsten carbide, in a bimetal body\u003c\/li\u003e\n\u003cli\u003eDesign: integrated nozzle and throat, quick-release\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 nozzle\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eMade for the QIDI Max4. It does not fit the QIDI Q2, which uses a nozzle of a different length.\u003c\/p\u003e\u003ch2\u003eWhen to replace it\u003c\/h2\u003e\u003cp\u003eReplace the nozzle when you see under-extrusion, a worn or widened tip, or clogs that cleaning does not clear. If you print abrasive filaments regularly, keep a spare on hand.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eCan I print carbon-fiber filament with this nozzle?\u003c\/h3\u003e\u003cp\u003eYes. Tungsten carbide is built for abrasive materials like carbon-fiber and glass-fiber filled PLA, PETG, PA and PC.\u003c\/p\u003e\u003ch3\u003eIs it in stock in Kuwait?\u003c\/h3\u003e\u003cp\u003eYes. NOZL Store keeps genuine QIDI spare parts in stock in Kuwait, ready for local delivery.\u003c\/p\u003e\u003ch3\u003eAny tips for a longer nozzle life?\u003c\/h3\u003e\u003cp\u003eStick to one filament type per nozzle where you can, as large temperature swings between materials raise the risk of clogs. Recommended print settings are in the \u003ca href=\"\/pages\/filament-guide\"\u003eNOZL Filament Guide\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eGenuine QIDI part, stocked in Kuwait by NOZL Store with local delivery. Looking for the printer itself? See the \u003ca href=\"\/products\/qidi-max4\"\u003eQIDI Max4\u003c\/a\u003e.\u003c\/p\u003e","brand":"QIDI","offers":[{"title":"0.4mm","offer_id":50207727714459,"sku":"NOZL_SPR_QIDI_MAX4_NZZL_TC04","price":21.5,"currency_code":"KWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/9870\/2235\/files\/qidi-max4-tungsten-carbide-bimetal-nozzle-nozl.webp?v=1794592684"},{"product_id":"qidi-max4-dual-sided-pei-build-plate","title":"QIDI Max4 Dual-Sided PEI Build Plate","description":"\u003cp\u003eThe QIDI Max4 Dual-Sided PEI Build Plate is a genuine replacement print surface for the \u003ca href=\"\/products\/qidi-max4\"\u003eQIDI Max4\u003c\/a\u003e and its 390 × 390 mm bed. PEI on both sides of a flexible spring-steel sheet gives strong first-layer adhesion while hot and clean release once it cools. Flex the plate and even large prints come off easily.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSurface: PEI on both sides\u003c\/li\u003e\n\u003cli\u003eBase: magnetic, flexible spring steel\u003c\/li\u003e\n\u003cli\u003eSized for the QIDI Max4 390 × 390 mm bed\u003c\/li\u003e\n\u003cli\u003eWorks with PLA, PETG, ABS, ASA, TPU and most engineering filaments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eMade for the QIDI Max4.\u003c\/p\u003e\u003ch2\u003eWhen to replace it\u003c\/h2\u003e\u003cp\u003eReplace the plate when first layers stop sticking even after a proper clean, or when the surface is scratched, dented or worn through. A second plate lets you keep printing while the other is cleaned.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eHow do I clean a PEI plate?\u003c\/h3\u003e\u003cp\u003eWash it with warm water and dish soap, rinse and dry it. Avoid touching the print surface with bare fingers, as skin oils reduce adhesion.\u003c\/p\u003e\u003ch3\u003eIs it in stock in Kuwait?\u003c\/h3\u003e\u003cp\u003eYes. NOZL Store keeps genuine QIDI spare parts in stock in Kuwait, ready for local delivery.\u003c\/p\u003e\u003cp\u003eGenuine QIDI part, stocked in Kuwait by NOZL Store with local delivery. Looking for the printer itself? See the \u003ca href=\"\/products\/qidi-max4\"\u003eQIDI Max4\u003c\/a\u003e.\u003c\/p\u003e","brand":"QIDI","offers":[{"title":"Default Title","offer_id":50206752243867,"sku":"NOZL_SPR_QIDI_MAX4_PEI","price":18.0,"currency_code":"KWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/9870\/2235\/files\/qidi-max4-dual-sided-pei-build-plate-nozl.webp?v=1794592685"},{"product_id":"qidi-max4-bimetal-hot-end","title":"QIDI Max4 Bimetal Hot End","description":"\u003cp\u003eThe QIDI Max4 Bimetal Hot End is a genuine replacement hot end for the \u003ca href=\"\/products\/qidi-max4\"\u003eQIDI Max4\u003c\/a\u003e 3D printer. A bimetal hot end keeps heat in the melt zone, reducing heat creep and clogs. Fit it to replace a worn or damaged hot end, or keep one on the shelf so a failure does not stop your work.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eType: bimetal hot end\u003c\/li\u003e\n\u003cli\u003eGenuine QIDI part\u003c\/li\u003e\n\u003cli\u003eMade for the QIDI Max4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eMade for the QIDI Max4.\u003c\/p\u003e\u003ch2\u003eWhen to replace it\u003c\/h2\u003e\u003cp\u003eReplace the hot end if it has been damaged in a crash, if heat creep or clogs keep returning after a nozzle change, or if the heater or thermistor area is damaged.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eDo I need a new hot end or just a new nozzle?\u003c\/h3\u003e\u003cp\u003eStart with the nozzle. If problems continue after a nozzle swap, the hot end is the next part to replace.\u003c\/p\u003e\u003ch3\u003eIs it in stock in Kuwait?\u003c\/h3\u003e\u003cp\u003eYes. NOZL Store keeps genuine QIDI spare parts in stock in Kuwait, ready for local delivery.\u003c\/p\u003e\u003cp\u003eGenuine QIDI part, stocked in Kuwait by NOZL Store with local delivery. Looking for the printer itself? See the \u003ca href=\"\/products\/qidi-max4\"\u003eQIDI Max4\u003c\/a\u003e.\u003c\/p\u003e","brand":"QIDI","offers":[{"title":"Default Title","offer_id":50206752309403,"sku":"NOZL_SPR_QIDI_MAX4_HTND","price":14.5,"currency_code":"KWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/9870\/2235\/files\/qidi-max4-bimetal-hot-end-nozl.webp?v=1794592684"},{"product_id":"qidi-max4-extruder","title":"QIDI Max4 Extruder","description":"\u003cp\u003eThe QIDI Max4 Extruder is a genuine replacement extruder assembly for the \u003ca href=\"\/products\/qidi-max4\"\u003eQIDI Max4\u003c\/a\u003e. It drives the filament into the hot end, and a healthy extruder is the key to consistent extrusion across the Max4's large build volume.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: complete extruder assembly\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 1.75 mm\u003c\/li\u003e\n\u003cli\u003eGenuine QIDI part\u003c\/li\u003e\n\u003cli\u003eMade for the QIDI Max4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eMade for the QIDI Max4.\u003c\/p\u003e\n\u003ch2\u003eWhen to replace it\u003c\/h2\u003e\n\u003cp\u003eReplace the extruder if you see clicking, grinding, inconsistent extrusion or under-extrusion that a nozzle change does not fix, or if the drive gears are visibly worn.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHow do I know the extruder is the problem?\u003c\/h3\u003e\n\u003cp\u003eIf a new nozzle and a clean filament path don't fix under-extrusion or clicking, the extruder gears are the most likely cause.\u003c\/p\u003e\n\u003ch3\u003eIs it in stock in Kuwait?\u003c\/h3\u003e\n\u003cp\u003eYes. NOZL Store keeps genuine QIDI spare parts in stock in Kuwait, ready for local delivery.\u003c\/p\u003e\n\u003cp\u003eGenuine QIDI part, stocked in Kuwait by NOZL Store with local delivery. Looking for the printer itself? See the \u003ca href=\"\/products\/qidi-max4\"\u003eQIDI Max4\u003c\/a\u003e.\u003c\/p\u003e","brand":"QIDI","offers":[{"title":"Default Title","offer_id":50206753128603,"sku":"NOZL_SPR_QIDI_MAX4_EXTR","price":11.0,"currency_code":"KWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/9870\/2235\/files\/qidi-max4-extruder-nozl.webp?v=1794592684"},{"product_id":"qidi-max4-model-cooling-fan","title":"QIDI Max4 Model Cooling Fan","description":"\u003cp\u003eThe QIDI Max4 Model Cooling Fan is a genuine replacement part-cooling fan for the \u003ca href=\"\/products\/qidi-max4\"\u003eQIDI Max4\u003c\/a\u003e. It cools each layer as it is printed, which keeps overhangs, bridges and fine details sharp, especially with PLA.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFunction: part (model) cooling\u003c\/li\u003e\n\u003cli\u003eGenuine QIDI part\u003c\/li\u003e\n\u003cli\u003eMade for the QIDI Max4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eMade for the QIDI Max4.\u003c\/p\u003e\u003ch2\u003eWhen to replace it\u003c\/h2\u003e\u003cp\u003eReplace the fan if it is noisy, spinning slowly or not at all, or if overhangs and bridges have suddenly got worse.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eIs this the same as the hot end cooling fan?\u003c\/h3\u003e\u003cp\u003eNo. The model cooling fan cools the printed part. The hot end fan cools the hot end to prevent clogs.\u003c\/p\u003e\u003ch3\u003eIs it in stock in Kuwait?\u003c\/h3\u003e\u003cp\u003eYes. NOZL Store keeps genuine QIDI spare parts in stock in Kuwait, ready for local delivery.\u003c\/p\u003e\u003cp\u003eGenuine QIDI part, stocked in Kuwait by NOZL Store with local delivery. Looking for the printer itself? See the \u003ca href=\"\/products\/qidi-max4\"\u003eQIDI Max4\u003c\/a\u003e.\u003c\/p\u003e","brand":"QIDI","offers":[{"title":"Default Title","offer_id":50206754472091,"sku":"NOZL_SPR_QIDI_MAX4_FAN_MDL","price":6.0,"currency_code":"KWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/9870\/2235\/files\/qidi-max4-model-cooling-fan-nozl.webp?v=1794592684"},{"product_id":"qidi-max4-hot-end-cooling-fan","title":"QIDI Max4 Hot End Cooling Fan","description":"\u003cp\u003eThe QIDI Max4 Hot End Cooling Fan is a genuine replacement fan for the \u003ca href=\"\/products\/qidi-max4\"\u003eQIDI Max4\u003c\/a\u003e. It keeps the cold side of the hot end cool so filament only melts where it should, which prevents heat creep and clogs.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFunction: hot end (heatsink) cooling\u003c\/li\u003e\n\u003cli\u003eGenuine QIDI part\u003c\/li\u003e\n\u003cli\u003eMade for the QIDI Max4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eMade for the QIDI Max4.\u003c\/p\u003e\u003ch2\u003eWhen to replace it\u003c\/h2\u003e\u003cp\u003eReplace the fan if it is noisy, has stopped spinning, or if you suddenly get clogs mid-print. A failed hot end fan quickly leads to jams, so do not delay.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWhat happens if the hot end fan stops?\u003c\/h3\u003e\u003cp\u003eHeat travels up into the cold side of the hot end, filament softens too early, and the nozzle jams. Replace a failing fan straight away.\u003c\/p\u003e\u003ch3\u003eIs it in stock in Kuwait?\u003c\/h3\u003e\u003cp\u003eYes. NOZL Store keeps genuine QIDI spare parts in stock in Kuwait, ready for local delivery.\u003c\/p\u003e\u003cp\u003eGenuine QIDI part, stocked in Kuwait by NOZL Store with local delivery. Looking for the printer itself? See the \u003ca href=\"\/products\/qidi-max4\"\u003eQIDI Max4\u003c\/a\u003e.\u003c\/p\u003e","brand":"QIDI","offers":[{"title":"Default Title","offer_id":50206754537627,"sku":"NOZL_SPR_QIDI_MAX4_FAN_HTND","price":4.0,"currency_code":"KWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/9870\/2235\/files\/qidi-max4-hot-end-cooling-fan-nozl.webp?v=1794592684"},{"product_id":"qidi-max4-print-head-cable","title":"QIDI Max4 Print Head Cable","description":"\u003cp\u003eThe QIDI Max4 Print Head Cable is a genuine replacement cable for the \u003ca href=\"\/products\/qidi-max4\"\u003eQIDI Max4\u003c\/a\u003e. It connects the print head to the mainboard, carrying power and signals for the heater, fans and sensors.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFunction: print head to mainboard connection\u003c\/li\u003e\n\u003cli\u003eGenuine QIDI part\u003c\/li\u003e\n\u003cli\u003eMade for the QIDI Max4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eMade for the QIDI Max4.\u003c\/p\u003e\u003ch2\u003eWhen to replace it\u003c\/h2\u003e\u003cp\u003eReplace the cable if you see intermittent errors from the print head, such as fans cutting out, temperature errors or sensor faults, especially ones that appear when the print head moves.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eHow do I know the cable is faulty?\u003c\/h3\u003e\u003cp\u003eErrors that come and go as the print head moves, across more than one component, often point to a worn cable rather than the parts themselves.\u003c\/p\u003e\u003ch3\u003eIs it in stock in Kuwait?\u003c\/h3\u003e\u003cp\u003eYes. NOZL Store keeps genuine QIDI spare parts in stock in Kuwait, ready for local delivery.\u003c\/p\u003e\u003cp\u003eGenuine QIDI part, stocked in Kuwait by NOZL Store with local delivery. Looking for the printer itself? See the \u003ca href=\"\/products\/qidi-max4\"\u003eQIDI Max4\u003c\/a\u003e.\u003c\/p\u003e","brand":"QIDI","offers":[{"title":"Default Title","offer_id":50206755160219,"sku":"NOZL_SPR_QIDI_MAX4_CABLE_PH","price":4.0,"currency_code":"KWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/9870\/2235\/files\/qidi-max4-print-head-cable-nozl.webp?v=1794592684"}],"url":"https:\/\/www.nozlstore.com\/collections\/3d-printer-spare-parts.oembed","provider":"NOZL","version":"1.0","type":"link"}