ABS Pro
When strength matters more than surface finish.
Low stock
In stock, ready to ship
Description
ABS Pro is a modified ABS formula built to reduce the two problems that put people off standard ABS: warping and weak layer bonding. Shrinkage is lower, layer adhesion is stronger, and odour during printing is noticeably reduced.
It holds the properties that make ABS worth using — heat resistance to around 100°C, high toughness, and clean post-processing by sanding, drilling, or acetone smoothing. Suited to automotive interior parts, tool housings, functional prototypes, and anything that will sit in a hot car in a Kuwait summer.
Recommended settings: 240–260°C nozzle, 90–100°C bed, part cooling off or minimal. An enclosure is strongly recommended — ABS Pro is more forgiving than standard ABS, but a stable chamber temperature still gives the best results. Compatible with all 1.75mm FDM printers.
1.75mm diameter, 1KG spool. Vacuum-sealed.
Notified by email when this product becomes available
The NOZL Breakdown
Filament Specification
| Print Temperature (°C) | 250-270 |
| Bed Temperature (°C) | 80-100 |
| Max Volumetric Speed (m³/s） | 10-12 |
| Outdoor Use | Yes |
| Enclosure Requirement | Yes |
