PC
When parts have to survive heat, load, and abuse.
Low stock
In stock, ready to ship
Description
PC is the strongest material in our filament range. Polycarbonate offers heat resistance beyond 110°C, outstanding impact strength, and stiffness that neither PLA nor ABS can approach. Parts flex before they fracture.
This is a material for genuinely demanding parts: workshop jigs and fixtures, printer components that sit close to the hotend, light-duty gears and bushings, snap-fit housings that need to survive repeated flexing, and protective guards on machinery. It also holds its shape in a car left in the sun, where PLA and even PETG will sag. It is not a beginner filament, and we would rather say so upfront than have it disappoint you.
Recommended settings: 260–290°C nozzle, 100–110°C bed, part cooling off. An enclosure and an all-metal hotend are required. PC absorbs moisture quickly — dry the spool before every print if it has been open, or feed it directly from a dry box. Compatible with all 1.75mm FDM printers rated for high-temperature materials.
1.75mm diameter, 1KG spool. Vacuum-sealed.
Notified by email when this product becomes available
The NOZL Breakdown
Filament Specification
| Print Temperature (°C) | 260-280 |
| Bed Temperature (°C) | 90-100 |
| Max Volumetric Speed (m³/s） | 8-12 |
| Outdoor Use | Yes |
| Enclosure Requirement | Yes |
