{"product_id":"polydryer-filament-dryer-storage-system","title":"PolyDryer – Filament Dryer \u0026 Storage System","description":"\u003cp\u003eMost bad prints are caused by wet filament. Stringing, bubbling, rough surfaces and weak layers usually come from moisture the spool absorbed while it sat on a shelf. During Kuwait's humid months, that happens faster than most people expect.\u003c\/p\u003e\n\u003cp\u003eThe PolyDryer was co-developed by Polymaker and FabNotion. It dries your filament, then keeps it dry, all in one unit.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eThe Dry Dock heats the sealed PolyDryer Box to a maximum of 70 °C. Air circulates 360° around the spool so it dries evenly, and the spool turns on a central holder while it dries. You can pick one of three preset power levels or run it continuously. Set the timer and walk away: the unit switches itself off when drying finishes, and it cuts power if the temperature gets too high.\u003c\/p\u003e\n\u003cp\u003eWhen the filament is dry, lift the Box off the Dock and it works as sealed storage. The built-in hygrometer shows the humidity inside, and the desiccant compartment keeps it low until your next print.\u003c\/p\u003e\n\u003ch3\u003eBuilt to grow with you\u003c\/h3\u003e\n\u003cp\u003eOne Dry Dock works with as many PolyDryer Boxes as you need. Add Boxes as your filament collection grows and dry each spool in turn. Polymaker also publishes printable add-ons on Printables, so you can adapt the system to your own setup.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterials: PLA, PETG, ABS, TPU, PA, PVA and more\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 1.75 mm, 2.85 mm and 3.00 mm\u003c\/li\u003e\n\u003cli\u003eSpools: up to 1 kg, maximum 205 mm diameter × 78 mm width\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum temperature: 70 °C\u003c\/li\u003e\n\u003cli\u003eModes: 3 preset power levels + continuous drying\u003c\/li\u003e\n\u003cli\u003ePower rating: 68 W\u003c\/li\u003e\n\u003cli\u003eDimensions: 235 × 120 × 290 mm (Box on Dock)\u003c\/li\u003e\n\u003cli\u003eSafety: auto shut-off and over-temperature protection\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDry Dock\u003c\/li\u003e\n\u003cli\u003ePolyDryer Box\u003c\/li\u003e\n\u003cli\u003eHygrometer and desiccant box\u003c\/li\u003e\n\u003cli\u003eFilament seals\u003c\/li\u003e\n\u003cli\u003ePower adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eDrying only helps if the filament stays dry afterwards. Keep spools you aren't using sealed in a PolyDryer Box or an airtight container with desiccant. Nylon, TPU and PVA absorb moisture quickly, so dry them right before every print.\u003c\/p\u003e","brand":"Polymaker","offers":[{"title":"Default Title","offer_id":49697046069403,"sku":"NOZL_ACC_PLYDRY","price":29.9,"currency_code":"KWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/9870\/2235\/files\/Polymaker_PolyDryer_filament_dryer_nozl.png?v=1790850421","url":"https:\/\/www.nozlstore.com\/en-sa\/products\/polydryer-filament-dryer-storage-system","provider":"NOZL","version":"1.0","type":"link"}