No probe offset, no guesswork, just precise real contact.Unaffected by bed surface or environmental vibrations, it delivers unmatched first-layer accuracy, zero offset, and true plug-and-play leveling.
QIDI Q2
Start Simple. Print Anything.
Low stock
In stock, ready to ship
Description
The QIDI Q2 is an enclosed CoreXY 3D printer built to make professional-grade features approachable for beginners. It offers a 270×270×256mm build volume, a nozzle rated to 370°C, and a second-generation actively heated chamber reaching 65°C. Entry-level normally means PLA and a polite request not to push it — the Q2 runs PLA, PETG, ABS, ASA, TPU, PA, PC, PPS-CF and other carbon fiber composites instead.
Levelling is hands-free through an integrated load cell, where the nozzle itself acts as the probe for a true zero offset. CoreXY motion with high-hardness linear guide rails and a custom 1.5GT belt reaches 600mm/s with acceleration up to 20,000mm/s², while dual independent lead screw motors handle the Z axis. Prints land on a dual-sided textured PEI plate.
A 3-in-1 air filtration system — G3 pre-filter, H12 HEPA and activated carbon — reduces odors and particles, and the Q2 is the first entry-level 3D printer to earn US MET certification. An AI camera watches for print failures, with filament run-out detection and power-loss recovery as backup.
It runs Klipper, so QIDI Studio, OrcaSlicer and PrusaSlicer all work, accepting STL, OBJ, 3MF and STEP files over Wi-Fi, Ethernet, USB drive or QIDI Cloud. Printer dimensions are 402×438×494mm at 18.1kg. Multi-color printing requires a QIDI Box, sold separately.
Notified by email when this product becomes available
The NOZL Breakdown
-
Enclosed CoreXY, 270×270×256mm Build
-
370°C Nozzle | 65°C Heated Chamber
-
Zero-Offset Auto Levelling
-
3-in-1 Filtration, MET Certified
-
600mm/s With Linear Rails
The nozzle acts as the sensor, ensuring truly zero deviation
New 1.5GT custom belt
New 1.5GT custom belt with higher tooth density for smoother, more precise motion. Minimizes vibration frequency artifact (VFA) for better print quality.
Second-Gen active chamber heating reaches up to 65ºC
The advanced air circulation design ensures ideal conditions for printing high-temperature filaments.