Panchroma PLA Matte
Display quality, straight off the plate.
Low stock
In stock, ready to ship
Description
Polymaker Panchroma Matte PLA is a 1.75 mm, 1 kg matte PLA filament available in Kuwait from NOZL Store. It prints with a soft-touch, low-sheen surface that hides layer lines, so parts look finished straight off the build plate with no sanding or painting. It prints at 190–230°C on almost any FDM printer and runs smoothly in multi-material systems.
What Panchroma Matte is best for
Choose Panchroma Matte for models, figures, home décor, display pieces, gifts and tabletop miniatures: anything that will be photographed, presented or handled. The matte finish removes the glossy look standard PLA shows under light, so prints look made, not printed.
Specifications
| Specification | Panchroma Matte PLA |
|---|---|
| Diameter | 1.75 mm |
| Net weight | 1 kg |
| Nozzle temperature | 190–230°C |
| Bed temperature | 25–60°C |
| Maximum print speed | 300 mm/s |
| Tensile strength (X-Y) | 23.2 MPa |
| Softening point (Vicat) | 62°C |
| Cooling fan | On |
| Enclosure | Not needed |
| Drying | 55°C for 6 hours |
| Spool | Cardboard, reinforced edges |
Why makers choose Panchroma Matte
- Finished look: the matte surface hides layer lines, so prints need no post-processing.
- Consistent results: Polymaker tunes each color individually, so a new color prints like the last one.
- Tangle-free: neat factory winding prevents knots and snags on long prints.
- Multi-color ready: reinforced cardboard spools feed reliably in multi-material systems.
Panchroma Matte or Panchroma Basic?
Choose Panchroma Matte when appearance matters most. Choose Polymaker Panchroma PLA (Basic) when you want a smooth standard finish, faster printing (up to 350 mm/s) and stronger parts (40.4 MPa compared with 23.2 MPa tensile strength).
Frequently asked questions
What is Panchroma Matte PLA?
Panchroma Matte is a bioplastic-based PLA filament from Polymaker with a soft matte finish that hides layer lines. It is designed for display prints that should look finished straight off the printer.
What temperature should I print Panchroma Matte at?
Print at a nozzle temperature of 190–230°C and a bed temperature of 25–60°C, with the part-cooling fan on. No enclosure is needed.
Do I need a hardened nozzle for Panchroma Matte?
Not for normal use. Panchroma Matte is slightly more abrasive than standard gloss PLA, so a hardened nozzle is only worth considering if you print large volumes of it.
Does Panchroma Matte work in multi-material systems?
Yes. It comes on a cardboard spool with reinforced edges designed to feed smoothly in multi-material systems.
Can I leave Panchroma Matte prints in a car in Kuwait?
No. PLA starts to soften at around 60°C, and car interiors in Kuwait's summer get far hotter than that. For car accessories and anything left in the sun, use Polymaker PETG.
Do I need to dry Panchroma Matte?
Only if the filament has absorbed moisture, which shows as stringing, popping or rough surfaces. Dry it at 55°C for 6 hours. In Kuwait's humid late-summer months, store open spools in a sealed box or a PolyDryer.
Notified by email when this product becomes available
The NOZL Breakdown
Filament Specification
| Print Temperature (°C) | 190-230 |
| Bed Temperature (°C) | 25-60 |
| Max Volumetric Speed (m³/s） | Up to 24 |
| Outdoor Use | No |
| Enclosure Requirement | No |
